Description
The Tempest Indirect hot water storage cylinders are equipped with an internal coil and are specifically crafted for compatibility with gas or oil-fired boilers as the primary heat source, whether in a sealed system or open-vented setup. Constructed from Duplex stainless steel, these cylinders come complete with a pre-installed 3 kW immersion heater, serving as a reliable backup heat source.
Features:
- 316L grade stainless-steel 22mm compression fittings and coils.
- Mains pressure hot water supply with high flow rates.
- Rapid reheat capability.
- Factory-installed temperature and pressure relief valve, set at 7Bar / 90°C.
- Remote expansion vessel provided with a wall mounting bracket.
- Complete unvented kit included.
- Remarkable energy efficiency.
- Full insulation to minimize heat loss.
- Pre-installed 3kW immersion heater.
- Lifetime manufacturing warranty for the inner container (with a 2 year warranty on components).
Technical data:
- Brand – Telford
- Range – Tempest
- Product Type – Indirect Unvented Cylinder
- Material – Duplex Stainless Steel
- Capacity – 200ltr (Nominal) / 194ltr (Actual)
- Wattage – 85W
- Diameter – 580mm
- Height – 1525mm
- Weight – 88kg (Empty) / 282kg (Full)
- Standing Heat Loss – 1.85kWh/24hr
- Standing Loss – 77W
- ErP Rating – C
- Temperature of Thermostat – 60°C
- Coil Surface Area – 3m²
- Immersion Heater Rating – 1 x 3kW
- Pressure – 3Bar
- Max Incoming Supply Pressure – 12Bar
Supplied with:
- Acetal tundish
- Inlet control group
- Two port valve
- External expansion vessel with bracket
- Dual probe thermostat
- Temperature & pressure relief valve factory-fitted
- 3kW immersion heater factory-fitted
- Manufacturer CodeTSMI200
- Delivery OnlyNo
- Product TypeIndirect Unvented Hot Water Cylinder
- BrandTelford
- RangeTempest
- Capacity200ltr (Nominal) / 194ltr (Actual)
- MaterialDuplex Stainless Steel
- Height1525mm
- Diameter580mm
- Weight88kg (Empty) / 282kg (Full)
- Wattage85W
- ErP RatingC
Reviews
There are no reviews yet.