Description
Heavy duty cavity wall anchor for use in plasterboard, most hollow concrete block, cavity walls and ceilings.
Features:
- Pack includes both 40mm and 60mm screws for a wider variety of fixture thicknesses.
- Zinc plated and passivated (3 microns) pan head machine screws.
- Standard metric thread.
- Rapid installation, just Zip & Fix.
Drill:
- Drill a 13mm hole in the substrate – 50mm cavity clearance required behind substrate.
Push:
- Ensuring the thumb tab faces upwards, insert the metal toggle through the hole, so it pivots down behind the substrate.
Zip:
- Zip the nylon collar towards the wall so the collar sits into the drilled hole.
- Snapp off the nylon arms.
Fix:
- Insert a M6 screw through the fixture and into the threaded part of Zip-Fix and tighten until secure.
Technical data:
- Material – Plastic
- Screw sizes – M6 x 40mm & M6 x 60mm
- FCH Ø – 7mm
- Max. FT – 45mm
- Driver bit size – PZ3
- Corrosion rating (1-5) – 1 Clean, dry & low humidity environments
- Substrates – Plasterboard, Block
Concrete 25N/mm²:
- Drill hole Ø – 13mm
- Rec. tensile load – 0.60kN
- Max. rec. load – 60kg
Plasterboard 12.5mm:
- Rec. tensile load – 0.30kN
- Drill hole Ø – 13mm
- Max. rec. load – 30kg
Dense board 15mm:
- Rec. tensile load – 0.56kN
- Max. rec. load – 56kg
- Drill hole Ø – 13mm
Double board 25mm:
- Rec. tensile load – 0.47kN
- Max. rec. load – 47kg
- Drill hole Ø – 13mm
Quantity in pack – 10
Please note – The nylon arms are for installation purposes only. Once removed this fixing becomes all-metal and has an improved fire resistance.
- Manufacturer CodeZIP6
- Delivery OnlyNo
- BrandTIMCO
- MaterialPlastic
- Quantity in Pack10pk
Reviews
There are no reviews yet.