trend® Lock Jig

Description

Features:

• This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.
• For most common sash mortises & dead locks, with up to 3″ deep mortises & a 7/8″ or 1″ face-plate.
• Deeper mortises can be achieved with a suitable size of auger bit.
• Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
• Steel plates & body.
• An auger bit and drill is required to complete deep mortises.
• The jig requires a ½” plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
• A ¼” plunge router can be used for the face plate but will not achieve full depth of mortise.

Technical data:

• Door thickness min. – 34mm
• Door thickness max. – 58mm
• Template outer size 234.3×59.8×1.5mm
• Brand – trend®

Templates to use for locks having the following face-plate dimensions:

Metric (Imperial approx.) Diameter x Overall length.

• 22.2x156mm(7/8×6.1/8″) – 1
• 22.5×152.5mm (7/8×6″) – 2
• 25.4x121mm (1×4.3/4″) – 3
• 25.4×127.5mm (1×5″) – 4
• 25.4×133.5mm (1×5¼”) – 5
• 25.4x145mm (1×5¾”) – 6
• 25.4x153mm (1×6″) – 7
• 25.4×156.5mm (1×6″) – 8
• 25.4×165.5mm (1×6½”) – 9
• 25.4x177mm (1×7″) – 10
• 25×57.5mm (1×2¼”) – 11 Upper
• 26×56.5mm (1×2¼”) – 11 Lower
• 25.6x162mm (1×6.3/8″) – 12

Mortise Lock Template Dimensions:

Imperial (Metric) Diameter x Overall length.

• 16x72mm (5/8×2.7/8″) – A
• 16x107mm (5/8×4¼”) – B
• 19x78mm (¾x3.1/8″) – C
• 19x109mm (¾x4¼”) – D

Please note – These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel – Actual length of mortise is 7mm longer

Set consists of:

• Guide bush collar
• 12 x Face plate templates
• 4 x Mortise templates
• 6 x Spacer fingers

• Manufacturer CodeLOCK/JIG
• Delivery OnlyNo
• Brandtrend®